WIRING DIAGRAM - Single colour strip dimming
Catalogue Number
WD6
Typical wiring diagram set up for dimming single colour led strip using a Radio frequency controller powered by a NON dimmable driver .The RF remote control can operate the controller through walls up to 30 metres .The total load of the strips not to exceed 90% of the rated drivers. The controller and remote is 4 zone so,if multiple strips need to be set at different brightness levels ,this can be achieved . Refer to the 2nd diagram
Typical wiring diagram set up for dimming single colour led strip using a Radio frequency controller powered by a NON dimmable driver .The RF remote control can operate the controller through walls up to 30 metres .The total load of the strips not to exceed 90% of the rated drivers. The controller and remote is 4 zone so,if multiple strips need to be set at different brightness levels ,this can be achieved . Refer to the 2nd diagram
| Delivery Time | 1-2 Day Delivery |
|---|---|
| Manufacturer | T-Lighting |
