WIRING DIAGRAM -Led strip 4 sides using 12 volt

Typical wiring diagram for running 12 volt led strip around a room . 12 volt strip will lose brightness after 5 metres so to prevent this ,connect both ends to a driver up to 10 metres of strip .This illustration shows 2 x 10 metres connected by a driver in opposite corners .If it is not practical to have a driver in 2 places then refer to diagram 4 showing 24 volt strip instead .The total load of the strips not to exceed 90% of the rated drivers. This set up only works with single colour led strip not RGB or RGBW