8 Zone Remote control for 24 volt RGB +Tunable white led strip
Catalogue Number
RGBCCT8ZRC
8 Zone Wireless 2.4G RF remote control and holder for RGBCCT tunable led strip
Input/Output 12 - 24 volt
This remote is to be used in conjunction with 4 zone wireless receivers for RGBCCT tunable led strip
This remote control will control multiple receivers together or separately across 8 zones
Operating distance up to 30 metres
Dimensions 155x53x22mm
Requires 2 x AAA batteries . Prize back open using flat screwdriver
The receiver can also be controlled by an app .A WFC wifi module must be purchased to enable the phone to communicate with the receiver
Input/Output 12 - 24 volt
This remote is to be used in conjunction with 4 zone wireless receivers for RGBCCT tunable led strip
This remote control will control multiple receivers together or separately across 8 zones
Operating distance up to 30 metres
Dimensions 155x53x22mm
Requires 2 x AAA batteries . Prize back open using flat screwdriver
The receiver can also be controlled by an app .A WFC wifi module must be purchased to enable the phone to communicate with the receiver
8 Zone Wireless 2.4G RF remote control and holder for 12 and 24 volt RGBCCT tunable led strip This device is to be used in conjunction with 4 zone wireless receivers for RGBCCT tunable led strip .Operating distance up to 30 metres. Multiple receivers can be controlled by one remote together or separately across 8 zones . 12 month warranty on remote controls
To link a receiver to a zone on the remote .
Switch power to receiver off . Then within 2 seconds of switching back on ,press a zone button at the bottom .If linked the led strip connected to the receiver
will flash 2 or 3 times . Repeat the process to link other receivers to other zones but disconnect power to receivers already linked to other zones firs.
Some of the remote features include
Dimming
White range control from 2200k to 6500k
White and colour can be mixed but only if saturation control is turned to zero .
M changes to different modes
on off button
To link a receiver to a zone on the remote .
Switch power to receiver off . Then within 2 seconds of switching back on ,press a zone button at the bottom .If linked the led strip connected to the receiver
will flash 2 or 3 times . Repeat the process to link other receivers to other zones but disconnect power to receivers already linked to other zones firs.
Some of the remote features include
Dimming
White range control from 2200k to 6500k
White and colour can be mixed but only if saturation control is turned to zero .
M changes to different modes
on off button
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| Manufacturer | T-Lighting |
Related Products
