Led strip 8mm input connector New Style
Catalogue Number
8MMIP150NEW
Led strip input connector for 8mm tape New style
Enables cut tape to be connected to a led driver
Maximum load with 12 volts = 24 watts
Maximum load with 24 volts = 48 watts
see photos and description
Width of connector 12mm
This connector can be used with 8mm -- 60 and 120 led per metre led tape
Enables cut tape to be connected to a led driver
Maximum load with 12 volts = 24 watts
Maximum load with 24 volts = 48 watts
see photos and description
Width of connector 12mm
This connector can be used with 8mm -- 60 and 120 led per metre led tape
Connector and lead for providing an input from cut 8mm led strip to a led driver .The lead consists of 150mm live and neutral lead and a snap down connector .Ensure that tape is cut exactly on the scissor line .The tape slides through the slot in the connector and locates on the 2 contacts in the connector.Once in line with the contacts the lid can be closed. If using a profile , please note the connectors are wider than the led strip so may not fit in your profile unless 12mm wide inside..
Delivery Time | Next day delivery if ordered before 1.30pm |
---|