Led Strip 4000k White Per Cut Length 9.6 Watts

Catalogue Number
120LED10NW1
Dimmable Led strip Self Adhesive
8mm wide
Up to 3 metres length listed but any length or special requirement can be ordered by phone
Neutral white( 4000k )3528 leds
9.6 watts per metre
120 leds per metre
950 lumens per metre
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 25mm
Supplied with a 2 metre soldered input lead
3 year warranty
We also offer a bespoke service .
Led strip 12 Volt Self Adhesive 8mm High Output Led Strip With neutral White Leds .9.6 Watts Per Metre. 120 leds per metre . .After ordering the strip you will need a suitable driver . Please see our Led drivers for led strip .Each Length of strip Comes with a soldered 2 Meter Input Lead to connect to the driver. We also have a infra red sensor switch which can be mounted under cabinet and used as a hand operated switch to cut down on wiring and convenience in finding a method of switching the tape on and off . We also offer a bespoke service. The strip can be cut every 25mm . Please note,the DIY clip on connectors can be used with this strip but due to the spacings of the leds ,the lid cannot be closed .The strip still works ,however,the lid gives extra grip to prevent the strip from moving out of postion and breaking contact .Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver. Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
More Information
Delivery Time 1-2 Day Delivery
Manufacturer T-Lighting