Led Strip IP67 6000k White Per Cut Length 9.6 Watts 24v

Catalogue Number
24VIP67LED10CW1
Commercial grade 3 year warranty 24 volt Waterproof to IP67 Dimmable Led Strip for outdoor use with self adhesive backing
10mm overall width
Up to 5 metres length listed but any length or special requirement can be ordered by phone
Cool white( 6000k )3528 leds
9.6 watts per metre
120 leds per metre .990 lumens
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm
Supplied with a 2 metre soldered input lead
This led strip fits snug inside a 1707FR2 profile .
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
Led Strip IP67 Waterproof Cool white 24 Volt 10mm 9.6 Watts Per Metre. 120 leds per metre with self adhesive backing . .After ordering the strip you will need a suitable driver . Please see our Led drivers for led strip .Each Length of strip Comes with a soldered 2 Metre Input Lead to connect to the driver. We also offer a bespoke service . The strip can be cut every 50mm . Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver.Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
This led strip fits snug inside a 1707FR2 profile .IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION. PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
More Information
Delivery Time 1-2 Day Delivery
Manufacturer T-Lighting