Led Strip Silicon coated 9.6 Watts 3500k White 10 Metres 24V

Catalogue Number
24VIPLED10WW10
Commercial Grade Dimmable Led Strip
Silicon coated IP63 Dimmable Led strip (Not Suitable for outdoor use .See IP67).
Output 24 Volt Dc
10 metres length
Warm white 3500k (3300-3500)
CRI 80
9.6 watts per metre
3528 leds 120 per metre 8mm wide
920 lumens per metre .No warranty as end of line stock
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm
Supplied with a 150mm soldered input lead at both ends
We also list cut lengths and offer a bespoke service
Silicon coated IP63 24 Volt Self Adhesive 8mm High Output 10 Metre Led Strip With warm white Leds .9.6 Watts Per Metre. 120 leds per metre . After ordering the tape you will need a suitable 24 volt driver . Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver. Each Length of Tape Comes with a 150mm soldered Input Lead to connect to the driver.We also list cut lengths .We also offer a bespoke service . The strip can be cut every 50mm . Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
Please note,the DIY clip on connectors can be used with this strip but due to the spacings of the leds ,the lid cannot be closed .The strip still works ,however,the lid gives extra grip to prevent the strip from moving out of postion and breaking contact .
More Information
Delivery Time Next day delivery if ordered before 1.30pm
length 10
Manufacturer T-Lighting