Led Strip Waterproof IP67 9.6 Watts 3000k White 50 Metres 24V
Catalogue Number
24VIP67LED10WW50
Commercial Grade 3 Year Warranty Dimmable Led Strip with self adhesive backing
Waterproof IP67 Dimmable Led strip for wet areas and outdoor use.
Output 24 Volt Dc
50 metres length 10mm overall width
Warm white 3000k
CRI 80
9.6 watts per metre
3528 leds 120 per metre 10mm wide
920 lumens per metre
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm
Supplied with a 150mm soldered input lead at both ends
We also list cut lengths and offer a bespoke service
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
.
Waterproof IP67 Dimmable Led strip for wet areas and outdoor use.
Output 24 Volt Dc
50 metres length 10mm overall width
Warm white 3000k
CRI 80
9.6 watts per metre
3528 leds 120 per metre 10mm wide
920 lumens per metre
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm
Supplied with a 150mm soldered input lead at both ends
We also list cut lengths and offer a bespoke service
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
.
Waterproof IP67 24 Volt 8mm High Output 50 Metre Led Strip With warm white Leds and self adhesive backing .9.6 Watts Per Metre. 120 leds per metre . After ordering the tape you will need a suitable 24 volt driver . Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver. Each Length of Tape Comes with a 150mm soldered Input Lead to connect to the driver. We also list cut lengths .We also offer a bespoke service . The strip can be cut every 50mm . Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| length | 10 |
| Manufacturer | T-Lighting |
