Wireless Single Zone Receiver for 12 and 24 volt RGB led strip

Wireless RF receiver for 12 and 24 volt RGB led strip . This device is connected between RGB led strip and the secondary side of the driver .It is then used with a RGB hand held remote to control colours of the led strip light .Operating distance up to 30 metres .One remote can control receivers together on the same zone . This is a single zone receiver . If you require different led strips to be controlled independently from the same remote control, then 4 zone receivers and remote are required. The receiver has a memory function so previous settings will be resumed when powered on again. Also has a dimming function.If you mislay your instructions there is an image of them. If you want to have multiple strips fading in and out or flashing using the mode button, then you are best off using the 4zone Receivers instead. This receiver will not stay synced when using the modes with more then one receiver.