Led strip 8mm joint connector
Catalogue Number
8MMJCNEW
Led strip joint connector for 8mm tape
Enables cut tape to be connected together to form a continuous length
See images and description
Using 12 volt the maximum is 24 watts load
Using 24 volt the maximum is 48 watts load
Width of connector 12mm
Enables cut tape to be connected together to form a continuous length
See images and description
Using 12 volt the maximum is 24 watts load
Using 24 volt the maximum is 48 watts load
Width of connector 12mm
Connector to join two pieces of cut 8mm led strip to make one continuous length .To connect simply open the connector and place the two tape ends in place and close the snap fit connector..Ensure that tape is cut exactly on the scissor line .The tape slides through the slot in the connector and locates under the 2 contacts in the connector.Once in line with the contacts the lid can be closed.
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|
