Wireless Single Zone Receiver for 12 and 24 volt RGBW led strip

Catalogue Number
WRGBW
Wireless RF receiver for RGBW led strip 12 and 24 volt
Single Zone
Input/Output 12 - 24 volt 2.4G Frequency
Use with remote control for RGBW strip which can be purchased separately
Total Output current 10A .Max load per channel 6A
Operating distance up to 30 metres
Multiple receivers can be controlled by one remote together
If you require different led strips to be controlled independently from the same remote control, then 4 zone receivers and remote are required.
Dc input and wired input
Dimensions 85x45x20mm
2 Year warranty

Wireless RF receiver for 12 and 24 volt RGBW led strip . This device is connected between RGBW led strip and the secondary side of the driver .It is then used with a RGBW hand held remote to control colours of the led strip light .Operating distance up to 30 metres.One remote can control multiple receivers together on the same colour . This is a single zone receiver .If you require different led strips to be controlled independently from the same remote control, then 4 zone receivers and remote are required. The receiver has a memory function so previous settings will be resumed when powered on again. Also has a dimming function. If you mislay your instructions there is an image of them. If you want to have multiple strips fading in and out or flashing using the mode button, then you are best off using the 4zone Receivers instead. This receiver will not stay synced when using the modes with more then one receiver.
More Information
Delivery Time Next day delivery if ordered before 1.30pm
Manufacturer T-Lighting