Led strip 10mm joint connector

Catalogue Number
10MMJC
Led strip joint connector for 10mm tape
Enables cut tape to be connected together to form a continuous length
See images and description
Maximum load with 12 volts = 24 watts
Maximum load with 24 volts = 48 watts
Connector width 14mm
Connector to join two pieces of cut 10mm led strip to make one continuous length .To connect simply open the connector and place the two tape ends in place and close the snap fit connector..Ensure that tape is cut exactly on the scissor line .The tape slides through the slot in the connector and locates under the 2 contacts in the connector.Once in line with the contacts the lid can be closed. If using a profile , please note the connectors are wider than the led strip so may not fit in your profile.
More Information
Delivery Time Next day delivery if ordered before 1.30pm