Led Strip 10mm 2 Metre input lead
Catalogue Number
10MMIP2
2 metre input connector for 10mm Led strip
Enables cut tape to be connected to a led driver
Maximum load with 12 volts = 24 watts
Maximum load with 24 volts = 48 watts
see photos and description
Width of connector 14mm
Enables cut tape to be connected to a led driver
Maximum load with 12 volts = 24 watts
Maximum load with 24 volts = 48 watts
see photos and description
Width of connector 14mm
Connector and lead for providing an input from cut 10mm led strip to a led driver .The lead consists of a 2 metre live and neutral lead and a snap down connector .Ensure that tape is cut exactly on the scissor line .The tape slides through the slot in the connector and locates under the 2 contacts in the connector. Once in line with the contacts the lid can be closed.
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| Manufacturer | T-Lighting |
