Led strip RGB 2 metre input connector

Catalogue Number
RGBIP2
Led strip 2 metre input for RGB10mm tape
Enables cut tape to be connected to a led driver
12 volts
see photos and description
Width of connector 14mm
Connector and lead for providing an input from cut RGB led strip to a led driver .The lead consists of 2 metre RGB lead and a snap down connector .Ensure that tape is cut exactly on the scissor line .The tape slides through the slot in the connector and locates under the contacts in the connector.Once in line with the contacts the lid can be closed. If using a profile , please note the connectors are wider than the led strip so may not fit in your profile.
More Information
Delivery Time Next day delivery if ordered before 1.30pm
Manufacturer T-Lighting