Wireless 4 zone Receiver for 24 volt RGB Tunable white led strip

Catalogue Number
RGBCCT4Z-S
Wireless 2.4G RF 4 zone receivers for RGB Tunable white led strip 12 and 24 volt
4 Zones
Input/Output 12 - 24 volt
Use with 4 zone remote control for RGBCCT Tunable strip which can be purchased separately
Total Output current 15A .Max load per channel 6A ( 15A of 24v strip = 360 watts maximum
Operating distance up to 30 metres
Multiple receivers can be controlled by one remote together.
The receiver can also be controlled by a phone app .A WFC wifi module must be purchased to enable the phone to communicate with the receiver
Dimensions 75x36x18mm
2 Year warranty

Wireless 4 zone RF receiver for 12 or 24 volt RGB Tunable white led strip . This device is connected between RGBCCT led strip and the secondary side of the driver .It is then used with a 4 zone RGBCCT hand held remote or wall controller to control colours of the led strip light .Operating distance up to 30 metres. One remote can control multiple receivers together on the same zone or on 4 different zones .For example. In a kitchen you may wish to have plinth lighting ,under cabinet lighting ,cupboard lighting and wall lighting on different zones and switched separately but using the same remote. The Controller has a memory function so previous settings will be resumed when powered on again. Also has a dimming function.If you mislay your instructions there is an image of them
Colour codes
+ = Black , R= Red ,G=Green,B=Blue ,CW= White ,WW.
More Information
Delivery Time Next day delivery if ordered before 1.30pm
Manufacturer T-Lighting