Led Strip Waterproof IP67 RGB Colour change 10m 24v

Catalogue Number
24VIP67RGB7LED10
Fully waterproof to IP67 RGB Dimmable Led strip
Led Strip in waterproof tube with self adhesive backing
12mm wide . 5mm Thick
10 metres in length
RGB colour change
7.5 watts per metre
30 leds per metre
Requires a wireless colour controller ,remote and NON dimmable led driver
Can be cut every 167mm
Supplied with a 150mm soldered input lead
Warranty 3 years
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
IP67 Fully waterproof RGB Led Strip With colour change Leds .7.5 Watts Per Metre. 30 leds per metre with self adhesive backing . .After ordering the strip you will need to order a wireless colour controller,remote and a suitable led driver .Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver. Each Length of led strip comes with a 150mm soldered Input Lead to connect to the driver. The strip can be cut every 167mm . Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
. PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
More Information
Delivery Time Next day delivery if ordered before 1.30pm
Manufacturer T-Lighting