Led Strip IP67 24V RGB + 4000k white Per Cut Length

Catalogue Number
24VIP67RGBNW15LED1
Fully waterproof to IP67 RGBW Dimmable Led strip with 4000k neutral white and self adhesive backing
Led Strip in waterproof tube not silicon coated
12mm wide . 5mm Thick
Up to 10 metres in length .Other lengths can be requested
RGBW colour change
14.4 watts per metre
30 colour +30 white 4000k leds per metre
Requires a wireless colour controller ,remote and NON dimmable led driver
Can be cut every 167mm
Supplied with a 2 metre soldered input lead
Warranty 3 years
.
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
IP67 Fully waterproof RGBW Led Strip With colour change Leds .14.4 Watts Per Metre. 60 leds per metre . .After ordering the strip you will need to order a wireless colour controller,remote and a suitable led driver .Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver. Each Length of led strip comes with a 2 metre soldered Input Lead to connect to the driver. The strip can be cut every 167mm . Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink . IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION. PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
More Information
Delivery Time 1-2 Day Delivery
Manufacturer T-Lighting